Being a driver on the road entails numerous risks and perils. You never know what will happen on your way from point A to point B.
Of course, we always hope to get to our destination safely and without any bumps or vehicle damage, but things don’t always go as planned.
The dreaded flat tire is one of the most common mishaps that motorists face while on the road. How To Change A Tire Without A Jack?
Changing a tire isn’t difficult, especially if you’ve done it before and have a jack in the trunk.
Some poor motorists, on the other hand, find themselves with a flat tire and no jack to help them! So, without a jack, how do you replace a tire? If this describes you, you’ll be relieved to learn that you can change a tire without using a jack.
In this post, we’ll go over the numerous ways for lifting your automobile without a jack, as well as step-by-step instructions for changing a tire without a jack.
What Do You Do if You Have a Flat Tire and No Jack?
First and foremost, don’t worry if you find yourself with a flat tire and no jack to help you change it. Depending on where you are, the steps you must take will differ. If you’re on a busy highway,
For example, you’ll need to pull over safely, turn on your hazard lights, and get yourself and any passengers to a safe location. After that, you’ll need to call a tow truck or roadside assistance to come out and change the tire for you.
It is possible to change a car tire without a jack if you have the correct knowledge and a few key equipments. Even if you have roadside assistance coverage or know where all of your area mechanics are, knowing how to change a car tire without a jack is essential.
Life on the road may be unpredictable, so it’s best to plan ahead of time what you’ll do if you run into any troubles.
How Can I Lift My Car Without a Jack?
A car jack is used to lift your vehicle off the ground. The jack keeps the automobile raised, allowing you to simply remove the flat tire and replace it with the spare. You’ll need to find another way to safely lift your car up so you can easily remove the damaged tire if you don’t have a jack.
Use a ramp
Using the ramp approach, you can lift your car wheel off the ground. A steel or plastic ramp is required, or you can make your own out of wood.
However, keep in mind that ramps have weight limits, so make sure your vehicle isn’t too hefty before driving it up one.
When you’ve finished building the ramp, place it next to the good tire on the same side as the flat. Drive up the ramp carefully, and the flat tire will be raised off the ground.
If you are unable to freely turn the flat tire, you may need to place some blocks under the ramp to help lift the tire higher off the ground.
Use slopes and curbs
Another option to get your flat tire off the road is to take advantage of naturally occurring slopes and even footpath curbs. To get the flat tire off the ground, you’ll need to drive at an angle down the slope.
Reversing onto a slope at an angle will activate the front wheels while driving upwards will activate the rear wheels.
Use a lever
You can use the lever approach if there are no surrounding hills or curbs. If you’re alone, you might not be able to move your car with a lever because it requires a significant amount of energy and strength.
A lug wrench will be required to remove the tire from the sockets. The next step is to make a lever out of a long piece of strong metal or wood. Your chosen item must be able to channel the weight of the car.
To change the weight of the car, you’ll need a sturdy stone or solid piece of wood to act as the pivot point.
Place the pivot point of the lever closer to your automobile than the end of the lever to prevent it from snapping and to make the operation of elevating the car slightly easier.
This procedure will almost certainly necessitate the participation of at least two persons. To raise the car, apply downward effort to the lever.
Place a huge piece of solid wood or a stone underneath your automobile to hold your tire off the ground.
Dig The Ground Method
Do not despair if you find yourself with a flat tire and no objects to use as a lever, no ramp, and no natural slopes to use to lift your automobile off the ground.
Simply dig away the ground around the tire to gain access to your flat tire.
To change your tire effectively using this method, drive your automobile till your flat tire is over open soil.
Then, between the axel and the ground, lay a block (or some other heavy padding material).
Dig the ground away from the tire with your hands, a stick, a wrench, or whatever else you can find.
The hole must be large enough for you to easily remove the flat tire and replace it with a spare. Continue digging until the automobile axle is resting just on the block; you should now be able to easily change the tire.
How To Change a Tire Without a Jack
If you ever find yourself without a jack and need to replace a tire, there are a few options. The first step is to find a safe way to get to the flat tire.
All you have to do now is get to work on getting your tire changed once you’ve settled on a safe approach.
Here’s a simple step-by-step tutorial to changing a tire without using a jack:
- Loosen the lug nuts on the flat tire with a lug wrench.
- Elevate your flat tire by digging the earth from beneath it or using a ramp, lever, slope, or curb.
- Lift the car until the tire can be readily turned and it moves freely with nothing in the way.
- Make sure your car is in ‘park’ and the emergency brake is activated. Place blocks behind the tires on the opposite side of the automobile if you have them. It is critical that you keep your car immobile when changing the tire.
- Remove all of the lug nuts from the flat tire with the lug wrench.
- Remove the flat tire and swap it out with the spare.
- Apply WD-40 to the lug nuts to aid in tightening. When replacing the lug nuts, you can also use a star screwdriver to ensure that the nuts are tightened uniformly.
- Place your flat tire in your trunk’s spare tire compartment until you can properly dispose of it (or until you can take it to be repaired).
- Remove the blocks or wheel chocks from behind the tires on the opposite side if you used them.
- You have now replaced your tire without using a jack. Remember to check the pressure of the spare tire you just placed with the tire pressure tester. Following a tire change, you may need to reset the TPMS in your vehicle.
FAQs About How To Change A Tire Without A Jack
How do you change a tire without tools?
Without a jack, a driver can change a tire in a variety of methods, but changing a tire without any equipment would be extremely difficult. You may raise your automobile tire without using any tools, however, removing the lug nuts without a wrench may be tricky.
Is changing a tire easy?
There aren’t many steps to changing a tire, but it’s an important skill for all drivers to know. Although loosening the lug nuts and tightening them onto the spare tire can be tough, utilizing your body weight to assist you should work.
Do new cars come with a jack and spare tire?
Unfortunately, the number of car models that include a spare tire and jack has decreased in recent years. Only over 60% of autos have a temporary spare tire in 2018, according to research. The other 40% of vehicles did not have a spare tire but did have a sealant kit, a specially designed ‘run-flat’ tire, and in rare cases, no spare tire at all.
Where is the jack located?
Make sure you’ve looked in the appropriate spot for your automobile jack before attempting to repair a flat tire without one. The jack, along with the spare tire, is usually found in the trunk of most cars. Lift the floor covering in your trunk to reveal the jack, which will be hidden beneath it. The jack should be under the cargo floor covering if you have an SUV.
Conclusion – How To Change A Tire Without A Jack
It is feasible to change a flat tire without using a jack, and it does not have to be a difficult procedure.
If you ever find yourself stopped on the side of the road with a flat tire and no jack, there are several options.
We hope you found this post helpful, and if you ever need to change a tire without a jack, remember to follow our step-by-step instructions.
